Contact Glue PVC SABA 70T (1ltr)

PVC Contact Adhesive SABA 70T is a transparent, water-resistant polyurethane (PU) contact adhesive. It is specially developed for bonding flexible PVC film, PVC fabric and artificial leather.

The adhesive is plasticiser-resistant and creates a flexible bond. This version is supplied in a 1-litre container.

Applications

This contact adhesive is used for boat covers, PVC tarpaulins, pond liners, protective covers and other technical PVC products.

It is suitable for joining PVC fabric sections, creating hems and carrying out repairs.

What should you consider?

Check that the adhesive is suitable for the material. Adhesion depends on the substrate, surface treatment and processing conditions.

The adhesive has an open time of approximately 10 minutes. It contains solvents and must be processed with adequate ventilation.

Processing and use

Clean and degrease both surfaces using a suitable cleaner. Apply the adhesive evenly to both surfaces with a brush.

Allow the adhesive to dry until tacky. Join the surfaces within the open time and press firmly together.

Check suitability through a trial bond beforehand.

Matching products

This contact adhesive is combined with Cleaner 21 for cleaning and degreasing surfaces before bonding.

Suitable adhesive brushes, pressure rollers and worktables may be used for processing.

Alternative or other version

PVC Contact Adhesive 70T is available in a 1-litre container (this version) and a 250ml container including a brush.

The smaller container is practical for repairs and small-scale applications. The 1-litre version is suitable when larger quantities of adhesive are required.

Matching Fepatex solution

This PVC contact adhesive forms part of solutions for sailmaking, marine fabrication and technical textile processing, where strong, flexible and water-resistant bonds in soft PVC are required.