Staple 56mm Nose Iron Zinc

The Staple 56mm Nose is used as a fixed guiding and attachment point for webbing in tarpaulin and transport applications. The nose-shaped design allows the webbing to be guided along or connected to the attachment point. This version is specifically intended for use with 30mm webbing.

Applications

This version is mainly used for truck tarpaulins, trailer covers, tarpaulins and similar transport covers where webbing forms part of the fabric fastening or tensioning system.

The nose-shaped design distinguishes this version from the square and round staples within the same 56mm range. Instead of forming only a closed staple, the nose provides a practical shape for applications where webbing needs to be guided or positioned at the attachment point.

What should you consider?

When selecting the staple, check that the webbing matches the nose-shaped opening, that the mounting points correspond with the structure and that sufficient space is available for the webbing to move freely.

This version is intended for 30mm webbing. Also check that the nose shape matches the way the webbing runs through the finished product. If a different fastening shape is required, a square or round 56mm staple may be more suitable.

Processing and use

The staple is mounted to a fixed surface or structure using its two mounting points. When mounting through sheet or panel material, a matching 56mm backplate can be fitted on the rear side.

The webbing is then guided or positioned at the nose of the staple. After installation, check that the webbing runs freely, is not twisted and has sufficient clearance to function correctly within the selected fastening method.

Matching products

This nose staple is combined with suitable 30mm webbing. The most suitable type of webbing depends on the application and on how the tarpaulin or cover needs to be secured or tensioned.

A matching zinc-plated iron 56mm backplate is also available for mounting the staple. It uses the same mounting size and can be fitted on the rear side of the mounting material.

Alternative or other version

A square H.30 version and a round H.30 version are also available within the same 56mm range. These use the same mounting size but have a different staple shape. Select the version according to how the webbing, eyelet or other fastening component needs to work with the staple.

Matching Fepatex solution

This staple forms part of fastening solutions for truck and trailer fabrication, tarpaulins and sailmaking, where fabric, webbing and fixed attachment points need to work together as one compatible system.